Circular Beam Splitter Kinematic Mount
Maximum Aperture Kinematic Mounts are used for routine laboratory applications. Its clear edge functionality helps us to reflect the beam by placing two mounts much close to each other than normal mounts, its 180-degree exposure view of optics makes placements and alignments of beam easy. Maximum Aperture Kinematic Mounts have two types of drive option either micrometre drive or lead screw drive. The front plate of the kinematic mount is pre-loaded by two high tension spring coils, ensuring tight kinematic fit. These mounts have two variant, come up with two lead screws for precise tip-tilt adjustment and three adjustment screw kinematic mounts are used to provide an additional translation motion. The mount can be used in either horizontal and vertical direction for mounting.
Application Notes
Maximum aperture of the mount helps in close proximity beam reflection to pass with a minimum distance between the mounts.
These mounts allow more reflection then normal mount if put face to face.
Specification
Finish: Black anodized matte finish
Total angular range: +/- 4 degrees.
Sensitivity: 4 arcsec.
Drive: Micrometer/ Stainless Steel 100 TPI Leadscrew drive.
Linear resolution of drive: 10- micron / 0.25 mm .
Mounting Orientation: Horizontal and Vertical.
Mounting Holes: M6 or M4 tapped hole for post mounting.
High tension spring for greater stability.
Product Matrix
2 Axis Kinematic Mount.
| Quantity | Doc | Part Number | Optics Diameter (in mm) | Angular range (in Degree) | Lens Mounting | Lead Screw (in TPI) | Sensitivity (in Arc Second) | Material | |
|---|---|---|---|---|---|---|---|---|---|
