Post Holder
The Standard Post Holder provides a simple method of adjusting the height of the accessories mounted on an 8 mm, 12 mm and 16 mm diameter mounting post. They are machined to close tolerance to accept the mounting post without any lateral motion. The Post is held in position by a spring-loaded thumbscrew. The Post holder has a standard M6 mm threading at the base, which is compatible with various types of the base plate, magnetic bases or standard carriers.
Specification
Material: Aluminium Alloy.
Finish: Black Anodized matte finish.
Dimensions: As per the product matrix.
Tapped Holes: M6 tapped hole for base mounting.
Compatible with our standard post of 12 mm and 16 mm.
Spring-loaded thumbscrew for tightening the post at a desirable position.
Finish: Black Anodized matte finish.
Dimensions: As per the product matrix.
Tapped Holes: M6 tapped hole for base mounting.
Compatible with our standard post of 12 mm and 16 mm.
Spring-loaded thumbscrew for tightening the post at a desirable position.
Product Matrix
Post Holder-12 mm
| Quantity | Doc | Part Number | Compatible with Post Diameter (mm) | Length (mm) | |
|---|---|---|---|---|---|
| PH-12-30 | 12 | 30 | |||
| PH-12-50 | 12 | 50 | |||
| PH-12-75 | 12 | 75 | |||
| PH-12-100 | 12 | 100 | |||
| PH-12-125 | 12 | 125 | |||
| PH-12-150 | 12 | 150 | |||
| PH-12-200 | 12 | 200 |
Post Holder-16 mm
| Quantity | Doc | Part Number | Compatible with Post Diameter (mm) | Length (mm) | |
|---|---|---|---|---|---|
| PH-16-30 | 16 | 30 | |||
| PH-16-50 | 16 | 50 | |||
| PH-16-75 | 16 | 75 | |||
| PH-16-100 | 16 | 100 | |||
| PH-16-125 | 16 | 125 | |||
| PH-16-150 | 16 | 150 |
