UV Fused Silica Negative Meniscus Lens

  1. Negative meniscus lens has negative focal length.
  2. These lenses can diverge light to form virtual images.
  3. Suitable for beam diverging application.
  4. These lenses decrease NA (Numerical Aperture) when introduced in an optical system.
  5. UV fused silica offers High Transmission in UV region.
  6. UV fused silica exhibits low laser-induced fluorescence.
  7. Fused silica has high bulk damage threshold and lower thermal coefficient compared to N-BK7.

Application Notes

  1. Negative Meniscus for Imaging :                                                                                                                                                      When a negative meniscus lens is combined with another lens, the focal length is increased and the numerical aperture of the system is decreased.
  2. Negative Meniscus for Beam Diverging :                                                                                                                                        Negative meniscus lens exhibit minimal spherical aberrations when diverging a (infinite conjugate) collimated beam, with convex side facing collimated beam.
  3. Negative Meniscus uses :                                                                                                                                                                  Negative meniscus lens are used mostly in high power beam-expanding applications where minimal spherical aberrations are needed and wherever focal Length increment with NA decrement is needed.

Specification

  1. Material : UV Fused Silica
  2. Focal length : ±1%.
  3. Diameter available : Ø5 to Ø100.
  4. Diameter Tolerance : +0/-0.1 mm.
  5. Clear aperture : 90%.
  6. Center Thickness : ±0.1mm.
  7. Centeration : Better than 3 arc min.
  8. Surface Irregularity : Lambda/4 @ 632.8 nm.
  9. Surface quality : 40-20 Scratch-Dig.
  10. Design Wavelength : 587.6 nm.
  11. Wavelength range : 350 nm- 2 µm. (Un-Coated)
  12. AR Coatings available : A)BBARC ; B) Laser V-Coating.
          Note : 1. To avoid reflection losses which result in ghost images, we suggest you to use AR-coating from our coating catalogue.
                      2. For good performance under low light conditions, we suggest you to use AR-coating from our coating catalogue.   
                      3. Customized designs are available from diameters of 3 mm to 300 mm with your specifications and coating options.

Product Matrix

UV FUSED SILICA NEGATIVE MENISCUS Lens- Diameter 25 mm

Quantity Doc Part Number Diameter (mm) Focal Length (mm) Back Focal Length (mm) Center Thickness (mm) Edge Thickness (mm)
NM-25-100FS 25 -100 -97.6 4 5.8
NM-25-125FS 25 -125 -123.1 4 5.5
NM-25-150FS 25 -150 -148.4 4 5.2
NM-25-200FS 25 -200 -197.1 4 4.9