Rotating base Prism Holder
These Mounts are used to mount prism and beam splitter cube in a firm & precise manner of different sizes. Its height adjusting clamping arrangement allows us to do so.
The rotating base provides us with the provision to adjust the beam on a wide-angle along the same plane which gives us the freedom to adjust the incoming & outgoing laser although the mount is fixed at one place.
Specification
Material: Aluminium Alloy.
Finish: Black Anodised matte finish.
Optics Holding capacity: 1” prism holder are suitable for mount prisms/cube from 5 mm to 25 mm.
Angular Adjustment Range: 360-degree coarse manual rotation.
Fine rotation range:±3 degree fine rotation.
Movement: 10-micron resolution micrometre.
Clamping arm is made up of heat-treated stainless steel to provide thermal stability.
The clamping flexure mechanism is attached to its post using lock by Allen key.
Clamping arm have nylon tipped set screw for securely hold the optics and prevent from damage.M6 tapped hole at the bottom for post mount.
Finish: Black Anodised matte finish.
Optics Holding capacity: 1” prism holder are suitable for mount prisms/cube from 5 mm to 25 mm.
Angular Adjustment Range: 360-degree coarse manual rotation.
Fine rotation range:±3 degree fine rotation.
Movement: 10-micron resolution micrometre.
Clamping arm is made up of heat-treated stainless steel to provide thermal stability.
The clamping flexure mechanism is attached to its post using lock by Allen key.
Clamping arm have nylon tipped set screw for securely hold the optics and prevent from damage.M6 tapped hole at the bottom for post mount.