Motorized Flipper Mount
Motorized Flipper Mount provides fast & precise flipping action to optics (i.e. Filters, Lenses, Mirror or Pinholes) in order to flip-in or flip-out from beam path. Precise alignment of optics may be done using two driving lead screws.
Application Notes
- Repeatable flip positioning.
- Orthogonally mounted mechanical hardstop.
- Anti-backlash 80 TPI lead-screw for precise positioning.
- Enhanced with Remote Hand-pad Control
- Toggle Thumb Control
- TTL Interface Control
- Feedback mechanism for flip position indication.
- Flexibility in input power
- 9 V cell
- 5 V DC supply
Specification
Material: Aluminium Alloy.
Finish: Black Anodised Matte Finish.
Optics Size: As per the product matrix.
Flip Angle: 90 Degree.
Dimensions (Length x Width): 75.25 x 50.5 mm.
Height (in the down position): 35 mm.
Height (in up position): 62.5 mm
Flip to Flip repeatability:25 micro radian.
Flip Time : < 0.5 sec.
XY tilt screws: 80 TPI Leadscrew.
XY Resolutions/5 degree turn : <200 Micro radian.
M4 C'Borehole for base mounting.
Finish: Black Anodised Matte Finish.
Optics Size: As per the product matrix.
Flip Angle: 90 Degree.
Dimensions (Length x Width): 75.25 x 50.5 mm.
Height (in the down position): 35 mm.
Height (in up position): 62.5 mm
Flip to Flip repeatability:25 micro radian.
Flip Time : < 0.5 sec.
XY tilt screws: 80 TPI Leadscrew.
XY Resolutions/5 degree turn : <200 Micro radian.
M4 C'Borehole for base mounting.