Compact Rotary Stage
Rotation stage allows the 360-degree coarse rotation in addition to ±5 degree fine rotation with resolution of 0.1 degree in azimuth axes. Rotation stage consists of pre-loaded rolling contact bearing which is used to reduce the friction and play also provided low noise, vibration-free, high stability smooth operation. For mounting on breadboard four numbers of M6 or M4 counterbore hole at the corners are provided. An additional adopter plate is also available for mounting other optomechanical components on the top plate of the stage.
Specification
Material: Aluminium Alloy or Stainless Steel.
Finish: Black Anodised matte finish or Ground finish.
Top Disc diameter range: 50 mm to 300 mm.
Coarse adjustment range: 360 degree.
Fine adjustment range: ±5 degree.
Drive: MicrometerRead out: 0.1 degree.
Load Capacity: Up to 100 kgs in horizontal axes and up to 25 kgs in vertical mounting.
Tapped Hole at the top disc: M6 tapped hole at the matrix of 25 mm.
Mounting Holes: M6 C’Bore hole at four corners for base mounting.
Finish: Black Anodised matte finish or Ground finish.
Top Disc diameter range: 50 mm to 300 mm.
Coarse adjustment range: 360 degree.
Fine adjustment range: ±5 degree.
Drive: MicrometerRead out: 0.1 degree.
Load Capacity: Up to 100 kgs in horizontal axes and up to 25 kgs in vertical mounting.
Tapped Hole at the top disc: M6 tapped hole at the matrix of 25 mm.
Mounting Holes: M6 C’Bore hole at four corners for base mounting.