N-BK7 Positive Meniscus Lens

  1. Positive meniscus lens has positive focal length.
  2. These lenses can converge light to form real image.
  3. Suitable for beam focusing application.
  4. These lens increase NA (Numerical Aperture) when introduced in an optical system.
  5. N-BK7 lenses are General purpose and low cost lenses.

Application Notes

  1. Positive Meniscus for Imaging :                                                                                                                                                      When a positive meniscus lens is combined with another lens, the focal length is shortened and the numerical aperture of the system is increased, this reduces the image distortion and increases image resolution.
  2. Positive Meniscus for Beam Focusing :                                                                                                                                           Positive meniscus lens exhibit minimal spherical aberrations and reduced spot sizes when focusing a (infinite conjugate) collimated beam, with convex side facing collimated beam.
  3. Positive Meniscus uses :                                                                                                                                                                  Positive meniscus lens are used as single or in multi-elemental camera Lens, beam-expander intermediate Lens and wherever focal Length decrement with NA increment is needed.

Specification

  1. Material : N-BK7
  2. Focal length : ±1%.
  3. Diameter available : Ø5 to Ø100.
  4. Diameter Tolerance : +0/-0.1 mm.
  5. Clear aperture : 90%.
  6. Center Thickness : ±0.1mm.
  7. Centeration : Better than 3 arc min.
  8. Surface Irregularity : Lambda/4 @ 632.8 nm.
  9. Surface quality : 40-20 Scratch-Dig.
  10. Design Wavelength : 587.6 nm.
  11. Wavelength range : 350 nm- 2 µm. (Un-Coated)
  12. AR Coatings available : A)BBARC ; B) Laser V-Coating.
  13.   Note1. To avoid reflection losses which result in ghost images, we suggest you to use AR-coating from our                                 coating catalogue.
                  2. For good performance under low light conditions, we suggest you to use AR-coating from our coating                              catalogue.
                  3. Customized designs are available from diameters of 3 mm to 300 mm with your specifications and                                   coating options.                                                                                    

Product Matrix

N-BK7 Positive Meniscus Lens- Diameter 25 mm

Quantity Doc Part Number Diameter (mm) Focal Length (mm) Back Focal Length (mm) Center Thickness (mm) Edge Thickness (mm)
PM-25-075 25 75 68.2 4.7 2.4
PM-25-100 25 100 95.7 4 2.4
PM-25-125 25 125 121 3.7 2.5
PM-25-150 25 150 146.2 3.6 2.6

N-BK7 Positive Meniscus Lens- Diameter 50 mm

Quantity Doc Part Number Diameter (mm) Focal Length (mm) Back Focal Length (mm) Center Thickness (mm) Edge Thickness (mm)
PM-50-150 50 150 140.5 8.8 4.4
PM-50-200 50 200 191.9 7.5 4.4
PM-50-250 50 250 242.9 7 4.5