Prism Holder with Kinematic Base
These Mounts are used to mount prism and cube beam splitter in a firm & precise manner of different sizes. Its height adjusting clamping arrangement allows us to do so.
The Kinematic base with 2 adjusters provides us to move the beam passing through the prism along 2 axes.
Specification
Material: Aluminium Alloy.
Finish: Black Anodised matte finish.
Optics Holding capacity: 1” prism holder are suitable for mount prisms/cube from 5 mm to 25 mm.
Tip-Tilt Range: ±3 degree.
Movement: Two Stainless steel lead screw of 100 TPI.
Clamping arm is made up of heat-treated stainless steel to provide thermal stability.
The clamping flexure mechanism is attached to its post using lock by Allen key.
Clamping arm have nylon tipped set screw for securely hold the optics and prevent from damage.M6 tapped hole at the bottom for post mount.
Finish: Black Anodised matte finish.
Optics Holding capacity: 1” prism holder are suitable for mount prisms/cube from 5 mm to 25 mm.
Tip-Tilt Range: ±3 degree.
Movement: Two Stainless steel lead screw of 100 TPI.
Clamping arm is made up of heat-treated stainless steel to provide thermal stability.
The clamping flexure mechanism is attached to its post using lock by Allen key.
Clamping arm have nylon tipped set screw for securely hold the optics and prevent from damage.M6 tapped hole at the bottom for post mount.